Turntable |
|
---|---|
Drive Method | Belt-drive |
Type | 2-speed, fully manual operation |
Motor | DC servo motor |
Speeds | 331/3 RPM, 45 RPM |
Turntable Platter | Die-cast aluminum |
Wow and Flutter | < 0.15% WRMS (33RPM) at 3kHz |
Signal-to-Noise Ratio | > 60dB |
Output Level | Pre-amp: PHONO: 4.0mV nominal at 1kHz, 5cm/sec Pre-amp: LINE: 200mV nominal at 1kHz, 5cm/sec |
Power Supply Requirements | 100 to 240V, 50/60Hz |
Power Consumption | 220V 50Hz (EU) Working: 1.2W • Motor off: 1.1W • Power Off: 0.2W |
Dimensions | 116.9 x 420.0 x 340.0 (H x W x Dmm) |
Weight | 5 kg |
Accessories Included | AT-HS4SV Headshell AT-VM95C Dual Moving Magnet Cartridge with Elliptical Stylus Detachable RCA output cable (dual RCA male to dual RCA male) AC adapter, 45 RPM adapter, Counterweight, Rubber mat, Removable hinged dust cover |
Cartridge & Stylus |
|
---|---|
Model | AT-VM95C |
Type | VM Dual Magnet |
Output Voltage | 4mV (at 1.5kHz, 5cm/sec) |
Vertical Tracking Force Range | 1.8 to 2.2g (standard 2.0g) |
Stylus Shape | Bonded Conical Stylus |
Stylus Size | 0.6 mil |
Recommended Load Impedance | 47,000 ohms |
Replacement Stylus | AT-VMN95C |
Headshell |
|
---|---|
Model | AT-HS4SV |
Weight | 8.5g |
Tone arm |
|
---|---|
Type | Static balanced straight aluminium tonenarm |
Effective Length | 223.6mm |
Overhang | 18.6mm |
Maximum Tracking Error Angle | Less than 2 degrees |
Stylus Pressure Adjustment Range | 0 to 3g |